s

Pricing & AvailabilityFDC15

 

<< Back to main

SINGLE AND DUAL OUTPUT, 4:1 WIDE INPUT RANGE
15 WATTS DC/DC CONVERTERS

 

pr16.jpg (16828 bytes)

  • 4 : 1 INPUT RANGE
  • EFFICIENCY UP TO 82%
  • SIX-SIDED SHIELD
  • 2 x 1 x 0.4 INCHES
  • OVER CURRENT PROTECTION
  • INTERNATIONAL SAFETY STANDARD APPROVAL
  • UL     UL1950     E193009
  • TUV  EN60950   R2054633
  • CB JPTUV-001402
  • CE     CE MARK
ELECTRICAL SPECIFICATIONS
All specifications are typical at nominal input, full load, and 25บC unless otherwise noted
INPUT SPECIFICATIONS

Input voltage range   24V nominal………..……….....…...….........…......………9 to 36V
  
                              48V nominal…........……..…….........……...................….20 to 75V
Input filter…………………………………………..………...……........  .......….Pi Type

OUTPUT SPECIFICATIONS

Output voltage accuracy.............................................................................................2%
External trim adjustment range….........................................................................
10%typ.
Ripple and noise, 20MHz BW.........................................................75mVP-P,15mV RMS
Line regulation, HL-LL.....…….…………..................................................……....
0.5%
Load regulation,                                                                                                                  FL to 1/10 FL……….............................……….....…...............
1%(Single), 5%(Dual)
Efficiency…………………..………………………..…..…...........……...…SEE TABLE
Temperature coefficient………….………………………......…...........…...…
0.02%/บC
Short circuit protection………………………...............................…............…Continuous Over voltage protection threshold:
5V Output………………................................................…….............................….6.2V 12V Output..………...................................................................................................15V 15V Output..……….........................................................................................…......18V Transient response recovery time,
25% load step change………...............................................................…............500ต sec

REMOTE ON/OFF CONTROL

Control voltage referenced to negative (-)input
Compatibility.….............................................................................................CMOS,TTL.
On-control.…………………………………....….....…........….…..…4.8V min. or Open
Off-control………....…............……………….…....……....……....…0.4V min. or Short

GENERAL SPECIFICATIONS

Switching frequency………………………….......................................….......270kHztyp.
Isolation voltage…………………………………....…...........…….…..…1600VDC,Min
Isolation resistance………....………………….…....……..........……....….109Ohms,Min

ENVIRONMENTAL SPECIFICATIONS (REFERENCE)

Operating temperature range………………….....……......…....….……..-25บC to +70บC
                "M2" (Option) …..................................................….....……...-40บC to +70บC
Storage temperature range………………...…...........………….....……-55บC to +105บC
Case temperature…………….............................................….....……...……100บC max.
Cooling………....………………………….....…......……….....…….Free-air convection
EMI/RFI……….....…...….....…........................................................Six-sided continuous
MTBF……........................….5.591 x
105Hour (MIL-HDBK-217F TA=25บC Full Load)

PHYSICAL SPECIFICATIONS

Case Material……......……...........…..Nickel-Coated Copper with Non-Conductive Base
Dimensions………..…......….….…...…….2.0 x 1.6 x 0.4 Inches (50.8 x 40.6 x 10.2mm)

MODEL
NUMBER

OUTPUT
VOLTAGE

OUTPUT
CURRENT
% typ.
EFF
CAPACITOR
LOADMAX.
FDC15-24S055VDC3000mA806800uF
FDC15-24S1212VDC1250mA82890uF
FDC15-24S1515VDC1000mA82570uF
FDC15-24D05+/-5VDC+/-1500mA80+/-1700uF
FDC15-24D12+/-12VDC+/-625mA82+/-300uF
FDC15-24D15+/-15VDC+/-500mA82+/-200uF
FDC15-48S055VDC3000mA806800uF
FDC15-48S1212VDC1250mA82890uF
FDC15-48S1515VDC1000mA82570uF
FDC15-48D05+/-5VDC+/-1500mA80+/-1700uF
FDC15-48D12+/-12VDC+/-625mA82+/-300uF
FDC15-48D15+/-15VDC+/-500mA82+/-200uF

m16.jpg (31896 bytes)
ALL DIMENSIONS IN INCHES (mm)
PIN PITCH TOLERANCE +/-0.5mm

 
Pin Connections
Pin#SingleDual
1+Vin+Vin
2-Vin-Vin
3No PinNo Pin
4CtrlCtrl
5No Pin+Vout
6+VoutCommon
7-Vout-Vout
8TrimTrim
*Ctrl: Remote On/Off Control
OPERATING TEMPERATURE LIMITS AND OUTPUT RANGE