News

December 2015

 

DF-A0047

 

  

The DF-A0047 is a handheld wideband antenna for direction finding and transmitter hunting in the 20 to 8500 MHz band.

It combines several antennas in a neat housing, and some integrated electronics to make it more effective when used in conjunction with signal analysers.

A single RF output is provided, with internal switching selecting the appropriate antenna, and choosing to connect or bypass the pre-amplifier. The amplifier is a low-noise wideband amplifier that enhances system sensitivity in active mode. In passive mode, the amplifier is bypassed so that the antenna can be used in the presence of strong signals.

OPTIONAL EXTRAS:
• The DF-A0047-01 is an extension module loop antenna allowing operation down to 9 kHz to 20 MHz. 
• The DF-A0047-02 is a neat and robust carrycase for the DF-A0047 and its accessories.

ELECTRICAL FEATURES:
• Digital compass gives precise bearing to source
• Very wideband performance in a practical size
• Horizontal and vertical polarisation
• Passive antenna if amplifier is switched off
• Excellent radiation patterns

MECHANICAL FEATURES:
• Small, light and easily operated by a single person
• Robust construction

 

For more information contact: Norgay Enterprises Ltd.

North America Toll Free: 800-280-2839  www.norgay.com  

 

 

 

 

 

 

November 2015

 

Efficient, Low Noise DC-DC Converters Save Space


It’s not often you come across a power supply with both ultra low noise and high efficiency—you usually have to trade off one for the other. With the new TLB5 series of DC-DC converters, you get both, along with many other compelling features. Let’s take a closer look.

 

Low noise, high efficiency. Polytron, has designed and tested the TLB5 series for extra low noise. These DC-DC converters have an output ripple and noise of just 10 millivolts, thanks to a built-in EN55022 Class B filter for reducing electromagnetic interference.

In addition to the low noise, the TLB5 power supplies are highly efficient. While other models have efficiency rates in the low 80 percent range, this series tops out at 89 percent efficiency.

Space-efficient too. There’s another aspect of efficiency worth noting: the TLB5 series saves space in your device. In many 2.5-watt single output applications, it’s common practice to double up a 2.5-watt power supply to meet the power requirements. With the 5-watt series, you can meet the same requirements with one small, compact DIP package of 1.25 x 0.80 x 0.40-inches.

Additional features. The TLB5 series has a wide operating temperature range up to 85°C and an input to output isolation voltage of 1600 volts. Other features include over current, short circuit, under voltage and over voltage protection, and a 4:1 wide input voltage range. This series also meets UL60950-1, EN60950-1 and IEC60950-1 safety standards. Some common applications include:

  • Telecommunications.
  • Data communications.
  • Measurement equipment.
  • Wireless network equipment.
  • Industrial control systems.
  • Semiconductor equipment.

For more information contact: Norgay Enterprises Ltd.

North America Toll Free: 800-280-2839  www.norgay.com  

 

 

 

October 2015

 

 

 

 

 

Capacitor Charger Family Models PS-17XX AND PS-22XX,

 With an Output Rated 500-1000VAC 

 


The Digital Power Corporation is proud to announce the release of their next generation Capacitor Charger family for Laser Applications for use in Industrial, Medical and Military applications. The modular design of these power solutions provides customers a highly efficient, and flexible product platform for a variety of applications. These products are state of the art designs that provide high Quality and best in class Reliability. Additionally, they are are approved to the EN60601-1 Medical standard.    

 

Product Applications

 

Typical applications include, but are not limited to, Flash Pump Laser Systems, Excimer Lasers, Irradiation Devices, Inspection Devices, Diagnostic and Therapeutic Equipment, Laser Aesthetic Systems, Medical Helmium YAG Lasers, Pulsed UV Curing Systems, Sterilization Systems and all other products that deliver bursts of pulsed energy.  

 


 

 

Product Highlights

 

* Universal Input 90-264VAC

 

* Size 12.7 x 5.75 x 4.05 inches (32 x 14 x 10cm)

 

* Agency Approvals: EN / IEC / UL60601-1

 

* Efficiency 84-88% an increase of 8% over current market solutions        

 

* Integral Fan for Cooling

 

* Operating Temperature Range 0-40C (32-104F)

 

* PFC 0.99% Typical at Full Load


 * MTBF 500,000 hours

 

* Total Output Power: 1500-2200 watts

 

* Output Voltage: Configurable from 500-1000VAC 

 

* Logic Interface

 

 

 

For more information contact: Norgay Enterprises Ltd.

North America Toll Free: 800-280-2839 www.norgay.com

  

 


 

Norgay Enterprises Ltd. Signs distribution agreement with Autec Power Systems.

 

The Autec Power Systems product line includes open frame power supplies from 45 watt to 500 watt, medical power supplies in open frame, desktop and U-channel configurations,

the Autec Flex custom configurable power system with up to 10 power modules per chassis, including redundant operation with diode isolation and parallel operation with single wire current sharing.

 

Also available are enclosed power supplies in 1000 watt, 1500 watt and 3000 watt configurations. A complete range of LED power supplies is also available in plastic and metal case options with IP67/IP65 ratings.  

 

For more information contact:

Norgay Enterprises Ltd. North America Toll Free: 1- 800-280-2839    www.norgay.com                                                      

 

 

 

September 2015

 

RDB108-420 and RDB117-470

 

                        

The RDB108-420 and RDB117-470 are wideband, high gain transmit/receive antennas covering

 the frequency range of 108 to 420 MHz and 117 to 470 MHz respectively. The stacked design provides the wideband characteristics of a traditional bi-conical, with the benefit of higher gain.

These antennas are designed for the general purpose base station ground-to-ground and ground-to-air (e.g. air traffic control) application and general V/UHF communications links.

Constructed of durable, high strength composite material and epoxy finished aluminium, these antennas will provide many years of service in harsh environmental conditions.

Standard or custom mounting adaptors/options available for various mounting methods.

 

For more information Contact:

 

Norgay Enterprises Ltd. North America Toll Free 800-280-2839 www.norgay.com     

 

 

 

August 2015

 

Switch In PIN Diode, GaAs and GaN Technology

 

 

 

 

 

 

 

 

Part Number: RFSP2TA0020G
High IP3 50dBm PIN Diode Switch 0.8-20GHz

Key Benefits

- Wide Band Operation 0.8-20.0GHz
-  High Power Handle Capability up to 5W upon request
- TTL Compatible Driver Included
- Fast Switching Speed
- Low Insertion Loss and High Isolation
- Temperature Range -
40ºC~+85ºC
- Customization available upon request

Primary Applications
*High-power switching applications including radar, communications, electronic warfare, and test instruments.

 

 

 

 

Part Number RFSPSTA5M50G
0.5-50GHz Full Band SPST, SP2T, SP4T, SP8T Switch
Key Benefits
- Wide Band Operation 0.5-50GHz
- TTL Compatible Driver Included
- Fast Switching Speed
- Low Insertion Loss and High Isolation
-
Temperature Range 45ºC~+85ºC
- Customization Available Upon Request
Primary Applications
*High-power switching applications including radar, communications, electronic warfare, and test instruments.

 

For more information on all

RF-LAMBDA Products Contact:

Norgay Enterprises Ltd.

North America Toll Free: 800-280-2839

 


Part Number: RFSP2TR5M06G
100W 0.5-6GHz High Power Hot Switchable Switch
Key Benefits
- Wide Band Operation 0.5-6GHz
- TTL Compatible Driver Included
- Fast Switching Speed
- Low Insertion Loss and High Isolation
- Temperature Range -
45ºC~+85ºC
- Hermatically Sealed Package up to 60,000 ft available upon request
Primary Applications
*High-power switching applications including radar, communications, electronic warfare, and test instruments.

 

 

 

Part Number RFSP12TA1218G
Switch Filter Bank SP12T 12-18GHz Customized Build
Key Benefits
- Wide Band Operation 12-18 GHz
- TTL Compatible Driver Included
- Fast Switching Speed
- Low Insertion Loss and High Isolation
- Temperature Range 45ºC~+85ºC
- Hermetically Sealed Package Up To 60,000 Feet Available Upon Request
- Customization Available Upon Request

Primary Applications
*High-power switching applications including radar, communications, electronic warfare, and test instruments.

 

 

 

 

July 2015

Photo:STD-601 (B)Circuit Design, Inc, the leading supplier of low power radio modules, has announced the release of the transceiver STD-601 400 MHz, a module for telemetry and industrial applications.

The design has gone one step further and has four frequency bands under one hardware, while maintaining as close as possible, the superior performance of Circuit Design's conventional RF modules. Featuring similar performance with regards to narrowband, blocking and sensitivity, the module is suited for rugged, noisy industrial environments where good channel selectivity is a requirement.    

These modules are surface mountable, taking up minimal area with the relatively small height (5 mm) of the casing allowing good portability.

The STD-601 includes four frequency bands conforming to various ISM bands within a single hardware. This therefore allows frequencies to be set within a wide frequency range.

As well as programmable frequency bands and channels, the STD-601 includes a variety of selectable RF power levels (maximum 50 mW RF power) and data rates. User data input is transparent allowing the use of proprietary protocol.  

 

 

Technical features:

 

     Selectable frequency bands: 429 / 434 / 447 / 458 MHz
     Selectable RF outputs: 50 / 25 / 20 / 10 / 5 / 1 mW
     Selectable RF bit rates: 1200 / 2400 / 4800 / 9600 / 19200 bps
     Asynchronous data input / transparent interface
     Compact size  20 × 32 × 5 mm SMD
     TX operating current 35 mA typ. (10 mW), 58 mA typ. (50 mW) at 3V
     Communication range 600 m (LOS) at 10 mW

 

Applications:

     Remote control of industrial equipment

     Industrial measurement systems  

 

For more information Contact:

 

Norgay Enterprises Ltd. North America Toll Free 800-280-2839 www.norgay.com     

 

 

 

 

June 2015

Norgay Enterprises Ltd signs representation and distribution agreement with Prime Power.

 

Prime Power is a designer and manufacturer of custom and standard power conversion products

for the military, aerospace, transportation high reliability markets.  Prime Power specializes in custom AC to DC power supplies and

DC to DC converters from 1 watt to 6Kw systems.

 

For more information contact Norgay Enterprises Ltd. www.norgay.com North America Toll Free: 800-280-2839

Or Prime Power www.prime-power.com   

 

 

April 2015

High-Power Wideband Jamming Antennas

 

OMNI-A0201 (100 to 6000 MHz) and OMNI-A0221 (20 to 3000 MHz)

 

OMNI-A0201 and OMNI-A0221
 

Two antennas in Alaris Antenna’s range include the OMNI-A0201 and the OMNI-A0221. These high-power, wideband, jamming antennas are designed for vehicle-mount applications and are rugged and hard-wearing in design.

These antennas are highly effective for improvised explosive device (IED) suppression as well as communications jamming.

The OMNI-A0201 operates from 100 to 6000 MHz in 4 bands. Band A covers 100 to 500 MHz, Bands B and C cover 850 to 960 MHz and 1700 to 2500 MHz and Band D covers 2000 to 6000 MHz. The radiators as well as the fibreglass whip are equipped with spring mounting to allow whip-action and resistance to impacts and obstructions. 

The OMNI-A0221 operates from 20 to 3000 MHz separated into 2 bands; Band A covers 20 to 180 MHz and Band B covers 500 to 3000 MHz. Band A can handle full rated power continuously at all frequencies, making it ideal for all 100% duty-cycle applications. The insulated radiator is robust, hard-wearing and impervious to fuel, oil and hydraulic fluid. 

These antennas are both designed to be directly mounted to ground platforms with the aid of a grounding strap.

 

 

 

December 2014

OMNI-A0098 - Active Monitoring Antenna - 20 to 6000 MHz

 

This vertically polarised omni-directional antenna consists of an active antenna array, covering 20 to 6000 MHz. The antennas are combined under 1 compact radome and output in a single connector (except the -02 version). The active part of the antenna protects the system from excessive field strengths and boosts low level signals.

The active version of this antenna relies on DC power injection on the output port of the antenna. The antenna is best utilised with the MISC-A0022 power supply for this purpose. The OMNI-A0098-01 features a passive-bypass mode which is engaged when the antenna is not powered. In this mode, the antenna is completely passive, allowing for low distortion measurements in the presence of high incident fields.

The antenna, when paired with the OMNI-A0156 or OMNI-A0100 horizontally polarised omni-directional monitoring systems, provide full spectrum coverage for diverse SIGINT requirements.
 

Features:

  • Protected against excessive field strengths
  • Very good sensitivity
  • Robust
  • IP63

Applications:

  • General spectrum monitoring
  • Vehicle-mount and mast-mount applications
  • Internal limiter allows operation in adverse EMC environments.

OMNI-A0098-02 passive antennas with two N-type connectors also available.

 

OMNI-A0190 - Compact Monitoring Antenna - 20 to 6000 MHz

 

The OMNI-A0190 is a compact monitoring antenna. Supplied in both active and passive versions, it allows monitoring over the full 20 to 6000 MHz band.

The active version of the antenna includes a nominal 10 dB amplifier to help overcome cable loss. The passive version has no amplifier, and is less expensive, and has no dynamic range limitations.

Using the supplied base and RF cable, the antenna can be neatly positioned on a table for shows, meetings and demos. The product printing can be customised to suit the client’s requirements.

Mast-mounting with the supplied bracket allows the antenna to be permanently mounted outdoors. The antenna is waterproof and UV stabilised, it can be used as a compact antenna for a permanent monitoring system.

 

MISC-A0022/MISC-A0066 - 15 V Coaxial Power Supply - 100 kHz to 6 GHz

 

A wideband 15 V coaxial power supply used to bias active antennas or amplifiers.

It is available as a single-channel (MISC-A0022) or dual-channel (MISC-A0066).

Internal power conditioning and filtering ensures a clean supply of power to the antenna with no RF noise from the power line, or external or internal sources.
 

Features:

  • Wideband (0.1 to 6000 MHz)
  • Low insertion loss
  • High current capability
  • Rugged construction
  • Automatic input voltage ranging.
  • Overload protection with fault indicator

Applications:

  • Power for active antennas
  • Biasing amplifiers

 

 

 

 

July 2014

RDB108-420: 108 to 420 MHz and RDB118-470: 118 to 470 MHz

 

 

The RDB108-420 and RDB118-470 are wideband, high gain transmit/receive antennas covering the frequency range 108 to 420 MHz and 118 to 470 MHz respectively. Their stacked design provides the wideband characteristic of a traditional biconical, with the benefit of higher gain (3 to 5 dBi).

Designed for general purpose base station ground-to-ground and ground-to-air (e.g. Air Traffic Control) applications and general V/UHF communications links.

Owing to their wideband, high gain characteristics, these dual bi-conical antennas are also ideal for spectrum monitoring and high power applications.

Constructed of durable, high strength composite material and epoxy finished aluminium, they will provide many years of service in harsh environmental conditions.

PRODUCT FEATURES:
 -Wideband (108 to 420 MHz and 118 to 470 MHz)
 -High gain
 -Durable

APPLICATIONS:
 -V/UHF communications
 -General base station

For more information contact: 

Bill Rajantie

bill@norgay.com   www.norgay.com

Norgay Enterprises Ltd. Toll Free 800-280-2839

 

 

 

 

September 2013

PLA100 / 150 /300 / 600 - The Next Generation of Reliable & Compact Power Solutions

 

The The PLA family of products is the next generation of highly reliable, and compact power solutions from Cosel. This product features higher efficiencies, smaller size, improved reliability and longer warranties than the competitors


The PLA100 / 150 models offer the additional feature of no-load power consumption < 1.5W with an option for < 0.5W to help customer applications meet ERP requirements.


Norgay provides extensive documentation in support of these products, including:

 

 

PLA FAMILY LINE-UP:


PLA100F : measures 41 x 97 x 109mm

Model  12V    15V    24V    36V    48V  
Watts    100.8W    100.5W    103.2W    100.8W    100.8W  
Output   12V 8.4A  15V 6.7A  24V 4.3A  36V 2.8A  48V 2.1A 


PLA150F : measures 41 x 97 x 129mm

Model  12V    15V    24V    36V    48V  
Watts    150.0W    150.0W    153.6W    151.2W    153.6W  
Output   12V 12.5A  15V 10.0A  24V 6.4A  36V 4.2A  48V 3.2A 


PLA300F : measures 41 x 102 x 190mm

Model  5V    12V    15V    24V    36V    48V  
Watts    250W    300W    300W    300W    302.4W    302.4W  
Output   5V 50A  12V 25A  15V 20A  24V 12.5A  36V 8.4A  48V 6.3A 


PLA600F : measures 61 x 120 x 215mm

Model  5V    12V    15V    24V    36V    48V  
Watts    500W    600W    600W    600W    601.2W    600W  
Output   5V 100A  12V 50A  15V 40A  24V 25A  36V 16.7A  48V 12.5A 

 

 

 

For more information contact: 

Bill Rajantie

bill@norgay.com   www.norgay.com

Norgay Enterprises Ltd. Toll Free 800-280-2839

 

 

 

July 2013

OMNI-A0156 - Wideband HP Active Monitoring Antenna - 20 to 3000 MHz

 

The OMNI-A0156 is an extremely wideband compact active horizontally polarised receiving antenna for omni-directional monitoring. It is designed for either static use on shelters or can be installed on vehicles.


Mounting is via the provided standard NATO and US 6/3/4 hole mounting flange, making it compatible with a variety of standard mounting arrangements.


The antenna provides 2 output ports which exit the antenna under the mounting flange for watertight and convenient vehicular installation. One output port covers the band from 20 to 1000 MHz and the second from 1000 to 3000 MHz.
The antenna is equipped with active matching and amplification, which provides excellent performance to very low frequencies.


The antenna can be powered using a product such as the MISC-A0022. Power is injected on the band A RF port.
The antenna is excellently twinned with the OMNI-A0098 active VP monitoring antenna to provide full spectrum coverage of both VP and HP signals.

 

Product Features:

  • Compact HP monitoring

  • Active matching and amplification

  • Standard mounting interface

  • Vehicular and shelf-mountable

Application Area:

  • Wideband monitoring

 

 

 

OMNI-A0191 - Vertical and Horizontal Monitoring Antenna - 20 to 6000 MHz

The OMNI-A0191 is a compact integrated vertical / horizontal polarisation monitoring antenna for the band 20 MHz to 6 GHz.



Based on the proven OMNI-A0098 product in the VP section, the active antenna provides excellent sensitivity across the band. An HP antenna below this provides horizontal coverage via 2 connectors.



The antenna is supplied with a short mast which supports the unit. Access to the base connectors is through a door in the mast.



An optional lightning-protection kit provides protection against direct strikes to the radome, making this antenna suitable for mast-top mounting.




For more information contact: 

Bill Rajantie

bill@norgay.com   www.norgay.com

Norgay Enterprises Ltd. Toll Free 800-280-2839

 

 

 

June 2013

Norgay EntNEW PRODUCT ANNOUNCEMENT: The Next Generation of Reliable & Compact- AC/DC Single Output Power Supplies- PLA100F/150F

 

Cosel Co. LTD is pleased to announce the next generation of enclosed power supplies. The PLA100/150 is a reliable, and compact offering now available. The PLA100/150 models are an extension of the PLA Series following our already released PLA300/600 models.

 

PLA100/150 has built in PFC, amazing compact size, high reliability with a 5-year warranty. The PLA series is manufactured at Cosel’s new facility in Wuxi ,China and is competitively priced against similar competitive products. PLA100/150 are as much as 25% smaller than the Cosel PBA Series and major competitors. In addition the power consumption of the standard PLA100/150 at no load is very low (1.5W typ), with the lower power consumption option at no load power consumption drops to 0.5W typ. This makes the PLA100/150 compliant with the EU ErP requirement. The PLA100/150 also has improved efficiency up to 90%.

 

The PLA100/150 will be available in output voltages of 12, 15, 24, 36 and 48 VDC. Multiple options are available including, conformal coating, connector types, vertical terminal block, Remote on/off, lower power consumption. The PLA100/150 have worldwide safety agency approvals including UL60950-1, C-UL, EN60950-1, UL508 and RoHS. The PLA Series is a general purpose power supply for many applications including Factory Automation, Test and Measurement, RF, food service, LED Sign, process controls, and other applications.

 

Features

  • Compact side

  • High efficiency

  • PLA100F 109mm (4.29 inch) length

  • Worldwide safety agency approval

  • PLA150F 129mm(5.08inch) length

  • 5 Year Warranty

  • Lower Power Consumption at No load

  • Standard Model 1.5W typ

  • ErP Compliant model (option L) 0.5W Max

For more information contact: 

Bill Rajantie

bill@norgay.com   www.norgay.com

Norgay Enterprises Ltd. Toll Free 800-280-2839

 

 

May 2013

Norgay Enterprises Ltd. Signs Canadian Distribution and Representation agreement with Poynting Defence.

 

Poynting Defence located in Johannesburg South Africa designs and manufactures high quality antenna solutions for the global defence, security and communications markets. Poynting Defence has an extensive range of HF,VHF, UHF and SHF (L -, S and C band) omni-directional and directional communications antennas, designed for tactical mobile, base station and man portable applications and strategic radio communications. Poynting Defence also provides Counter- RCIED in man-pack and vehicle mounted applications, direction finding antennas, LPDA Log Periodic Dipole Arrays and monitoring antennas for tactical signal detection.

 

Poynting Defence also manufactures a complete range of telescopic and sectional masts for use in applications where

lightweight antennas need to be rapidly deployed in either the forward base station or for static mobile communications.

 

For more information contact: 

Bill Rajantie

bill@norgay.com   www.norgay.com   www.poyntingdefence.com

Norgay Enterprises Ltd. Toll Free 800-280-2839

 

January 2013

New Product Announcement - DT6-Series External Medical Power Solutions

DT6-SeriesDigital Power announces the release of our AC/DC external power supply series with Medical approval. The DT Series provide 70-100 watts of output power and are designed for  all Medical applications.   

 

Applications For the DT-Series

Typical applications include Medical Carts, CT and PET Scanners, Oxygen Concentrators, Portable Medical Equipment, Blood Analyzers, Medical Computers, Robotic Surgical devices, Automated Pharmaceutical dispensers, Patient monitors, DNA equipment and Diagnostic equipment to name a few.

 

 Product Highlights

  • Universal input voltage range of 100 to 240 VAC
  • High Efficiency >87%
  • 70-100 Watts Output Power
  • Class II C8 (Suffix 2) and C18 (Suffix 6) Input connector options
  • Custom output connector and cable options
  • Output voltage options of 12V- 24V (Contact DPC for alternate output voltage options)
  • PFC 
  • Low Leakage: EN60601-1 Compliant
  • No load consumption <0.5W at Nominal Input
Compact size: 5.98 x 2.3 x 1.33 inches   (152 x 59 x 34mm)

For pricing information and samples for engineering evaluation contact Bill Rajantie at Norgay North America Toll Free: 800-280-2839 or bill@norgay.com      

 

 

 

November 2012

CITEL - Product Spotlight 

 In-Line Series Connection Adapter (DSDT16) for DS40 & DS70 Series AC Surge Protection Make your SPD more efficient by completly eliminating the voltage drop accross connection leads by 100% and reducing the let through voltage up to 50% !

 

The function of Surge Protective Device (SPD) is to limit the effects of transients originating from lightning and/or switching events on sensitive equipment.

 

A critically important consideration is the voltage drop across the connection leads from the SPD to the electrical system or sensitive equipment.

 

The recommended length for SPD connection leads is 3 feet or less and always remember, the shorter, the straighter, the better !

 

CITEL introduces the DSDT16 In-Line Series connection adapter for the DS40 or DS70 Series family of SPDs, This simple adapter eliminates 100% of the voltage drop across the connection and reduces the accumulated let-through voltage up to 50% !

 

CITEL DSDT16 is applicable in all AC network configuration from 1-phase to 3-phase and all voltages 120Vac to 600Vac. Reliability In Surge Protection Since 1937!

 

For pricing information and samples for engineering evaluation contact Bill Rajantie at Norgay North America Toll Free: 800-280-2839 or bill@norgay.com       

 

 

October 2012

New Product Announcement

Cosel introduces the KH Series EURO Style DIN Rail AC/DC Power Supply.  The KH series is introduced with 120 Watt and 240 Watt versions with more follow.

 

Standard features include:

  •  150% load peak capability

  • Reduced width verses comparable competitive models

  • Digital control providing the highest efficiency on the market up to 94%

  • Remote Control Terminals

  • Relay connections for abnormal output control on KHEA version only

  • Euro style or Barrier block connectors

  • Operating temperature up to 70C

  • Overload LED indicator

  • Voltage trim front face of unit

  • 5 year warranty

 Safety Approvals:

UL508, UL60950-1, EN50178, EN60950-1, CE, ISA12.12.01(CLASS 1 Div.2)

 

For pricing information and samples for engineering evaluation contact Bill Rajantie at Norgay North America Toll Free: 800-280-2839 or bill@norgay.com       

 

 

 

Product News Announcementhd365

Digital Power Announces our industry leading HD365-Series power solution product family has been upgraded to the Third Edition of the EN60601-1 Medical standard.

 

Applications For the HD365-Series

Typical applications include MRI, X-RAY, CT and PET Scanners, Blood Analyzers, Ultra Sound, Robotic Surgical devices, Automated Pharmaceutical dispensers, Patient monitors, DNA equipment and Diagnostic equipment to name a few.

Product Highlights

  • Universal input voltage range of 90 to 265 VAC
  • High Efficiency
  • 365 Watts w/Forced air cooling up to 50C
  • 200 Watts Rated at Natural Convection up to 50C
  • Output voltage of 12V, 24V or 48V (Contact DPC for alternate output voltage options)
  • +12V Auxiliary/Fan output
  • Active PFC
  • Low Leakage: EN60601-1 Compliant
  • Over Current,Over Voltage, Short Circuit and Over Temperature
  • Remote On/Off and Power Good
  • Compact size: 3 x 5 x 1.45 inches (127 x 76.2 x 36.9mm)

For pricing information and samples for engineering evaluation contact Bill Rajantie at Norgay North America Toll Free: 800-280-2839 or bill@norgay.com       

 

August 2012

New Product Announcement

power over ethernetDigital Power Announces Next Generation 55 Watt 1GB Power Over Ethernet Adapter  

 

Power Over Ethernet

 POE enables a LAN switching infrastructure to provide power over a copper Ethernet cable to an endpoint or powered device. This IEEE standard technology allows IP telephony devices, wireless LAN access points, switches, routers, and other embedded computer applications to receive power and data over CATS cabling. POE allows economical and flexible deployment of networked devices in a wide variety of situations.

 

Applications For POE

Typical applications for this product include wireless transceivers, video / data devices, and IP networking endpoints.

 

Product Specifications

  • Input voltage of 90 to 265 VAC
  • Input current of 0 to 1A
  • Frequency of 47 to 63Hz
  • Inrush current of 50A @ cold start
  • Output voltage of 55 VDC or 48 VDC
  • Reflected ripple per FCC part 15 & EN55022 class B
  • Ripple and noise 2% maximum at full load
  • Voltage regulation ±2% maximum for load and line variation
  • 88% minimum efficiency
  • Operating temperature range of -5 to 45 C
  • Voltage set point trim-pot or ±5%
  • Surge protection for power and data

 

For more information contact Norgay North America Toll free:  800-280-2839


January 2012

Cosel releases 2012 new product catalogue.

The Cosel new product offering includes the DPG 500, DPG 750 and the DPF 1000 Series front end Power Factor Correction Modules that are configurable with the DHS Series and the DBS Series DC to DC Converters to allow for single output and multiple output power supply configurations. The new TU Series power modules from Cosel are packaged in industry standard brick sizes AC85 – 264 universal inputs with 50 Watt, 100 Watt, 300 Watt and 500 Watt out puts available with standard operating temperature of -40 to +100*C. Cosel has also introduced a new range of power supplies for industrial and medical applications. EMI/EMC Filters from Cosel include three phase, single phase, and DC Filters with current ratings from 3 Amp to 300 Amps in low profile chassis mount and DIN Rail mount packages.   

 

To receive a free copy of the new 2012 Cosel product catalogue contact

Norgay Enterprises North America Toll Free: 800-280-2839 www.norgay.com          

 

 

New DIN Rail Power Supply Series from Cosel.

Cosel introduces new DIN Rail power supplies the KH Series of industrial power supplies include built in remote ON/OFF,

built in output voltage alarm signal, over current protection, over voltage protection and thermal protection. Wide operating

temperature range of -25 to +70*C. I/O Terminals with Euro Style and barrier Style blocks. Safety Agency Approvals include UL,

C-UL, EN60950-1 and EN50178.

 

For samples and product literature contact North American Distribution at 800-280-2839

 

 

December 2011

Diconex Microwave www.diconex.fr appoints Norgay Enterprises as manufacturers representative and distributor.

 

Diconex designs and manufactures an extensive range of Terminations, Resistors and Attenuators,

SMD chips, Flangeless and Stripline, Couplers Dividers and Impedance matchers. Diconex also manufactures

HF, VHF, UHF, and TETRA antennas and accessories.

 

For more information on Diconex RF/Microwave products contact

Norgay Enterprises North America Toll Free: 800-280-2839 www.norgay.com          

 

 

April 2009

US Toyo Fan Corporation appoints Norgay as Canadian distributor.

 

US Toyo Fan Co. offers an extensive range of AC and DC axial fans and blowers for electronics thermal management applications. The product line includes industry standard sizes as well as custom and special application cooling fans.

 

For more information contact: Norgay Enterprises Ltd.

www.ustoyofan.com

North America Toll Free: 800-280-2839

 

 

August 2008

Norgay Enterprises is the authorized distributor in North America for Orcam Systems AB.

 

GPS30F SiRFstar III based OEM-GPS receiver

The Orcam GPS30F is a compact, low cost, low power OEM GPS receiver based on the much acclaimed SiRF Star III GPS receiver chip architecture. The GPS30F features on-board LNA and SAW-filter to support the use of both active and passive external antennas. With a tracking sensitivity of -159 dBm, the GPS30 will continue tracking in the most demanding environments making indoor navigation possible and meeting the challenges of urban canyons and multi path environments.


gps30f_new label_red1


A-GPS Support

SiRFLoc™ improves GPS location capability in wireless systems by providing various modes of infrastructure assistance to improve weak signal reception, while the SiRF InstantFix™ technology eliminates the initial task of loading GPS data from the satellites themselves, significantly reducing the Time To First Fix in weak signal environments.

Power Supply

Designed to operate from “raw” 3.6 V battery voltage, GPS30F has all necessary power regulation and power management functions on board. It prrovides unparalleled SiRF Star 3 acquisition and navigation performance with a power consumption of less than 125 mW during tracking, making it ideal for embedding into portable battery powered applications.

 

I/O Signal Levels

1.2 V logic "PWR", "WAKE" and "LNA ENABLE" signals.

1.8 V logic for all other I/O signals, including the serial port.



For More Information in the United States and Canada contact North America Toll Free: 800-280-2839
 

 

June 2008


Excelsys Technologies appoints Norgay Enterprises as authorized distributor.

 

Excelsys Technologies designs and manufactures modular configurable power supplies. The Xgen series of products from Excelsys brings OEM power supplies to a new paradigm, combining technical excellence with simplicity to fully resolve all of the concerns regularly expressed buy users of multiple output power supplies. The Xgen series of power supplies from Excelsys Technologies provides an instant , no compromise power solution for any application where a unique configuration of voltage and current outputs are required.

 

Product Features include up to 1200 Watt multi-output power in a 1U (40mm) package, 1.5 Volt to 58 Volt standard output voltages, all outputs full floating, plug and play power module architecture allows fast custom configurations, facilitates rapid prototyping and simplifies logistics, ultra high efficiency up to 90%, Series Parallel of multiple outputs, visual LED indicators.

 

Applications include industrial machinery, test and measurement, automation equipment, telecommunications, medical equipment, audio and broadcast equipment and 19" rack mount systems.

 

We look forward to introducing you to the technical features and long term cost effective solutions for all of your power supply requirements. For pricing and availability or to order a no charge sample for your engineering evaluation contact Norgay Enterprises Ltd.

 

For more information contact Norgay North America Toll free:  800-280-2839

www.norgay.com

 

 

 

 

April 2008

 

Norgay distributes Fischer Elektronik thermal management, interconnect and extruded enclosure products to customers in the United States and Canada. Fischer Elektronik has been manufacturing standard and custom heatsinks for over 35 years and is recognized as an industry leader in state of the art thermal management solutions.

 

For more information contact Norgay North America Toll free:  800-280-2839

www.norgay.com

 

 

 

March 2008

 

New Product Announcement: SD-500

MEAN WELL introduces the new SD-500 series (500W) enclosed type DC/DC converter that expands our SD product line to a higher wattage range for the growing demand of high wattage DC/DC applications. After this, our DC/DC enclosed type product line would be complete and become one of the few manufacturers that can provide 15W, 25W, 50W, 100W, 150W, 200W, 350W, 500W, to 1000W. The entire product line will consist of 9 families and totall 78 models. Combined with our existing DC/DC module type series, on-board type (NSD series), and PCB type (PSD series) products, MEAN WELL can offer the most diversified DC/DC product portfolio on the market!


Featuring 4:1~2:1 wide DC input range and 2000VAC input/output isolation, SD-500 series have two kinds of DC input level – 19~72V(L type), 72~144V(H type) and three kinds of DC output level – 12V, 24V, 48V for end users to select from. With built-in short circuit, over load, over voltage, over temperature, and input polarity protections, these compact converters with the same size as SD-350 (350W) are suitable for general electrical engineering usage, automotive, and battery back-up applications which have space constraint s and required a compact DC/DC power solution. Other standard function includes output OK signal, remote ON/OFF control, and a remote sense function that can besuitable in many applications. Following are the features and main specifications of the SD-1000 series . Contact: Norgay Enterprises Ltd. North America Toll Free: 800-280-2839.

  • 4:1 & 2:1 wide input range
  • 2000VAC input/output isolation
  • Short circuit, overload, over-voltage, over-temperature, input polarity protection
  • Forced air cooling by built-in DC fan with fan speed control function
  • DC input active surge current limiting
  • Output OK signal
  • Remote ON/OFF control
  • Remote sense function
  • Dimension: 215mm*115mm*50mm (L*W*H)
  • 3 years warranty

     

 

 

 

 

February 2008

 

New Product Announcement: TS-1000 DC/AC Power Inverter

After launching the TN/TS-1500 series one year ago , MEAN WELL has announced the introduction of another new high performance DC/AC power inverter - TS-1000 series. Using high-frequency circuit topology, the true sine wave inverter is light weight and possess up to 92% of high efficiency. TS-1000 can provide 1000W continuously for all kinds of harsh load with low THD<3%. Peak load capability including 1150W for 3 minutes, 1500W for 10 seconds, or 2000W surge power for 30 utility cycles.

 

TS-1000 is controlled by a microprocessor and the output AC voltage and frequency can be adjusted easily through the front panel for various applications. Besides, the “standby saving mode” function can also be selected by end users through the same setting button to save the precious energy stored in the battery banks. Protections for this unit is quite complete: internal fuse, BAT low alarm, BAT low shutdown, BAT polarity, BAT over voltage protections for input side, while short circuit, inverter overload, over temperature protections, and GFCI (optional – type F) for output side. The design of TS-1000 series complies with global safety and EMC certificates and is suitable for powering all kinds of home appliances, power tools, and office & portable equipment in vehicles, yachts, mobile homes or places that the utility can’t be reached or the power quality is poor.

 

Following are the features and main specifications and please contact us for more detailed information: North America Toll Free: 800-280-2839. www.norgay.com

 

Features:

  • True sine wave output (THD < 3%)
  • Power ON/OFF switch & LED indicators for load / battery / operation status
  • Protections: Input – Fuse, Bat. low alarm, Bat. low shutdown, Bat. polarity, Bat. over voltage
  • Output – Short circuit, overload, over-temperature protection, GFCI (optional)
  • High surge power up to 2000W
  • High efficiency up to 92%
  • Thermal controlled cooling fan
  • Saving mode selectable by setting button
  • 100% full load burn-in test
  • Approval: E-mark, CE, FCC, UL458
  • Dimension: 393*184*70mm (L*W*H)
  • 2 years warranty

 

 

 

 

January 2008

 

New Product Announcement: MDR-100 Series

MEAN WELL has announced the introduction of new miniature DIN rail switching power supplies, MDR-100 series, for the fast growing demand of low wattage DIN rail applications. These Class I models (with F.G.) are enclosed with fully isolated plastic case to prevent users from hazardous shock. The design of universal AC input makes the worldwide installation more easily since users can get rid of bothersome input switch selection. Featuring active PFC function and up to 88% of efficiency, MDR-100 can be cooled by only free air convection up to 60℃. Another important feature of MDR-100 is its low no load power consumption (<1W). This unique characteristic in the market can significantly expand the application beyond just heavy industrial field, but can also be applied to datacom or IT applications with energy saving concern and to obey the anticipated government laws in the near future!

 

Short circuit protection, overload protection, over voltage protection, over temperature protection and the DC OK relay contact plus LED indicator for monitoring the status of PSU are standard functions for MDR-100 series. Typical applications include factory automation, process control, electro-mechanical industry, datacom, IT, and …etc.. Following are the features and main SPEC of the new MDR-100 series for more detail information: MDR-100 For a FREE sample for your engineering evaluation contact the North American

 

MEAN WELL Distributor at: 800-280-2839 www.norgay.com

 

  • Universal AC input / Full range
  • Active PFC comply with EN61000-3-2
  • Short circuit, overload, over-voltage, over temperature protection
  • Cooling by free air convection
  • Can be installed on DIN rail TS-35/7.5 or 15
  • DC OK signal output (relay contact)
  • No load power consumption <1W
  • LED indicator for power on
  • NEC Class 2 limited power source for 24V and 48V models
  • Dimension (W*H*D): 55mm * 90mm * 100mm
  • Certificate: TUV/CE/CB/UL/CUL
  • 3 years warranty
     

 

January 2008

 

Hot-Swap Inverter Modules Provide up to 1500VA/1200W

 

  • Sine wave inverters provide 115VAC or 230VAC from 48VDC
  • Two-unit 19in shelf units provide up to 3000VA or N+1 capability

Coral Springs, Florida —UNIPOWER announces a new series of hot-swap, high power density telecom inverters. The INV1000 Series are 1000VA/800W and 1500VA/1200W sine wave inverter modules which operate from a 48VDC input and provide either a 115 or 230VAC nominal output. Power density is 10.5VA/in³.

The design uses an advanced DSP controlled architecture to produce a very low distortion 50 or 60Hz sine wave at efficiency levels of 90% and better.

The modules are available with a compatible two-unit 1RU high, 19in shelf capable of providing double the output of a single unit or operating automatically in an N+1 mode. Multiple shelves can be connected in parallel to provide solutions up to 24kVA.

Inverters in the INV1000 Series can be operated independently or integrated using a matching controller or static transfer switch as well as a power distribution and maintenance by-pass unit. When the controller is used, a remote communications option provides PC connection via USB, RS232 or RS485 serial connection.

Front panel indication is provided for inverter status and relay alarm contacts are available on the rear panel. The modules are cooled by internal, variable speed fans.

All models meet the requirements of all relevant safety standards including UL60950-1, CSA22.2 No. 60950-1 and EN60950-1. The INV1000 Series units are RoHS compliant.

UNIPOWER is a leader in high-density, power solutions for telecommunications, data communications, network equipment, data storage, and industrial and medical systems. Headquartered in Coral Springs, Florida, UNIPOWER manufactures in Coral Springs, FL, at its European HQ at Lancing, West Sussex, UK and its dedicated plant in Guangdong, China.

Unipower is distributed by : Norgay Enterprises Ltd. www.norgay.com


North America Toll Free: 800-280-2839
 

 

 

November 2007

Cosel introduces the SFLS10, SFLS15 and SFLS30 DC to DC converters. These 48 Volt isolated converters are low profile with an operating temperature range of -40 to+ 85 * C.

 

Download PDF

 

For pricing and delivery information in North America contact Norgay Enterprises Ltd.

 

 

October 2007

 

New Product Announcement: SD-1000

2007.10.30

MEAN WELL launches the SD-1000 series (1000W) enclosed type DC/DC converter that expands our SD product lines to higher wattage range for the growing demand of high wattage DC/DC applications. Featuring 4:1~2:1 wide DC input range and 2000VAC input/output isolation, SD-1000 series have two kinds of DC input level – 19~72V(L type), 72~144V(H type) and three kinds of DC output level – 12V, 24V, 48V for end users to select from. With built-in short circuit, over load, over voltage and over temperature protection, these 1U low profile converters are suitable for general electrical engineering usage, automotive, and battery back-up applications which have space constraint and require a compact DC/DC power solution. Other standard functions  include 12V/0.25A auxiliary output, output OK signal, remote ON/OFF control, and remote sense function that can fit in with many possible special end applications. Following are the features and main specifications of the SD-1000 series and please visit our website for more detail information:  www.norgay.com  

l          1U low profile 41mm

l          4:1 & 2:1 wide input range

l          2000VAC input/output isolation

l          Short circuit, overload, over-voltage, over-temperature protection

l          High power density 10.7W/in3

l          Output OK signal

l          Remote ON/OFF control

l          Remote sense function

l          12V/0.25A auxiliary output

l          Dimension: 295mm*127mm*41mm (L*W*H)

l          3 years warranty

 

Distributed By Norgay Enterprises Ltd.

North America Toll Free: 800-280-2839   www.norgay.com

 

 

July 2007


Norgay signs North American distribution agreement with PowDec Technologies.

 

For more information contact: North America Toll Free 800-280-2839

 

Unipower Corporation Appoints Norgay as Distributor

 

Unipower Corporation is a leader in high-density, low profile and hot swap power solutions for telecoms, datacoms, network equipment, servers, data storage, industrial and medical systems. Headquartered in Coral Springs Florida, Unipower manufacturers there as well as at its European HQ at Lancing, West Sussex UK. Unipower also manufactures at its high volume manufacturing plant in Guangdong China. 

 

Unipower produces a complete line of switching power supplies and fault-tolerant power systems up to 10,000 watts. The product line includes cased and open frame switchers, bulk power front ends, modular /configurable switchers, hot-plug and N+1 redundant switchers. Standard, modified standard and custom products are produced.

For more information contact Norgay North America Toll Free: 800-280-2839.

 

 

 

June 2007

Digital Power’s new HD160 Series delivers the highest
output power in the 2 x 4 inch industry-standard footprint

 
Digital Power announces the release of its’ HD160 series of high-density AC to DC switch-mode power supplies that deliver up to 160 watts, approximately twice the power currently available in the industry standard 2 x 4” footprint.  These supplies are ideally suited for low profile / 1U High applications with a height of only 1.06 inches.


The HD160 series utilizes the latest technologies and advanced switching topologies to deliver operational efficiencies up to 90% with a power density exceeding 18W/in3, setting the standard for low and medium range power products.

 

These single-output power supplies offer standard output voltage set points of 5 / 12 / 24 /48 VDC. These supplies feature: Universal AC Input (85 to 264VAC), Active Power Factor Correction (EN61000-3-2 Class D Compliant), Protection against over-temperature, over-current and over-voltage conditions.

 

Safety Approvals for: Information Technology Equipment (ITE), (UL/cUL60950-1 / EN60950-1), Medical (UL/cUL 60601-1 / EN60601-1), bear the CE Mark (LVD), and conform to FCC / EN55022 Level B Emission Standards.  The HD160 Series offers reliable performance, high MTBF and is ROHS compliant. This series is ideal for a wide range of applications which include: Front-Ends for Distributed Power Architecture (DPA or IBA) in Telecom, Industrial, Military COTS, Medical and Scientific Instrumentation.


For more information contact Norgay: North America Toll Free 1-800-280-2839

 

 

May 2007

Norgay introduces the RID-125-1205 and the RID125-2405.


125 Watt Isolated Dual output power supplies.

More Info : PDF here.

 

 

May 2007

New product ~ NSD10 & NSD15 Series (10W & 15W DC-DC Regulated Single and Dual
Output)

 

MEAN WELL launches the NSD-10 (10W) and NSD-15 (15W) series on-board type DC/DC converter that expands our DC/DC product lines in the low wattage range for the emerging trend of distributed power applications. As the replace model of previous ASD-10H & ASD-15H, the new NSD series maintain the same dimension and pin assignment, but improve the performance and reduce the costs that offer users new choices of much higher value.

 

Featuring 4:1 wide DC input range and 1500VDC input/output isolation, NSD10/15 series both have two kinds of DC input level – 12V, 48V, and eight kinds of DC output level – 3.3V, 5V, 9V, 12V, 15V, ±5V, ±12V, and ±15V for end users to select from. (NSD15 doesn’t have the 9V model!)

Standard functions include remote ON/OFF control, short circuit, over load, and over voltage protections. The 15W models also possess output voltage trimming function that give users more flexibility to the system design. These economical gadgets are suitable for applications using distributed power architecture that transfer the high DC bus voltage to lower DC working voltage at the location of the load.
 

 
NSD10-D SPEC  
 
NSD15-D SPEC

 

 

February 2007

Pricing & Availability

4100 Series ELF Meter

 

VIEW DATASHEET

 

Lightweight and completely self contained, the easy to use 4100 Series ELF Meters are ideal for commercial or home use. The 4100 Series accurately measures Extremely Low Frequency Magnetic Fields generated by electrical equipment. Applications include detecting magnetic field emissions from a wide variety of sources, including video display terminals, AC power lines, office equipment, household appliances, and all types of electronic equipment.

 

This new meter represents the most recent design from the world leader in magnetic measuring equipment. Key features include Auto Zero, Min./Max./PeakHold, Auto Range and Relative Mode. Both models allow the user to select Gauss,Tesla or Ampere/Meter readings. The 4100 Series Hand-Held Gaussmeter’s built-in software eliminates the need for complex calibration procedures. User prompts on the custom formatted LCD allow fast, simple pushbutton operation. All models come with instruction manual, hard carrying case, and four AAA batteries.



For more information contact Norgay: North America Toll Free 1-800-280-2839

 

 


 

 

LEA International appoints Norgay Enterprises as Canadian distributor.

 

With over 30 years of experience devoted solely to the TVSS ( Transient Voltage Surge Suppression ) industry, LEA International offers one of the most comprehensive SPD ( Surge Protection Device ) product lines available world wide.

Lea protectors combine MOV, silicone series filters and suppression technologies for all applications from large scale protectors for broadcast, telecom, data centers, and manufacturing facilities to compact plug in protectors for home electronics and office equipment.

For more information : click here
Contact Norgay Enterprises : 800-280-2839

 

 

December 2006

Norgay Represents MFC.


Microwave Filter Company (MFC) appoints Norgay as exclusive manufacturers representative for Canada. Microwave Filter Company is a leader in the design, development and manufacture of high quality passive electronic filter products in the 5 Hz to 50 GHz frequency spectrum.


November 2006


more8
 
more9
 
more10
 
more11
 
more4
 
more5
 
more6
 
more7
 
To fulfill the global trend of energy-saving and environment protection, MEAN WELL launches two green mode adaptors that comply with California Energy Commission (CEC) Level IV and Energy Star Program standards. The new GS-18 / GS-25 series are 18W / 25W adaptors bearing global safety certificates. Featuring CEC Level IV compliant for 5~48V models, they are 90~264Vac full range input switchers with short circuit, overload, and over voltage protections. There are different kinds of AC inlet options that can be chosen for applications at main countries/areas all over the world, including IEC320-C 8 or C14 type AC inlets, and two poles American or European plug.

GS-18/25 series are suitable for all kinds of IT end products. The design concept of energy-saving, global applicability and user friendly significantly enhance their competitive advantage for penetrating the global market. Please check out the features and specification and you will find it just fit in with your future applications!

For no charge samples contact Norgay: North America Toll Free 1-800-280-2839


October 2006


Mean Well Introduces the RSP 1000 Series 1000 Watt Switching Power Supply.

Download PDF



October 2006


Mean Well introduces the MDR-2O DIN Rail Switching Power Supply.

Download PDF



September 2006


National Power & Signal Expands Product offering.
 
National Power & Signal (NPS) a Canadian manufacturer of custom EMI/RFI Gaskets and EMI Shielding Materials expands its product offering by establishing strategic marketing and sales agreements with Metex Corporation and Coolpoly.

For more information contact: www.nationalpowerandsignal.com

National Power & Signal North America Toll Free: 866-775-7715 

 


July 2006


Norgay Enterprises Signs Distribution Agreement with Bellnix.   Bellnix a designer and manufacturer of state of the art DC to DC  Converters appoints Norgay as its distributor. Products include Isolated Bus Converters to 300 Watts. Ultra small Isolated  Converters in 1/16 brick and 1/8 brick package sizes and an entire range of POL (Point of Load) modules.  

For pricing and delivery information on all Bellnix products  contact Norgay: North America Toll Free 800-280-2839       

 

 

June 2006

 

 
 
 

New product ~ RPS/D/T-60 Series (60W Medical / Industrial PCB Series )

MEAN WELL launches its first 4” * 2” PCB type switching power supply-RPS/D/T-60 series targeting at the medical and IT applications with the requirement of miniature size. The 5” * 3” PCB size has dominated the PCB type power supply market for many years and MEAN WELL also provide several choices from 45W to 200W for end users to choose from. However, based on the miniature trend of all kinds of electronic products, we believe that the 4” * 2” profile should be the next mainstream of the embedded PSU style and hence we would like to introduce these advanced models with 6.57W/in3 of high power density.

Complying with both medical and industrial agency standards, these units can deliver their full rated output of 50~60W with only free air convection and also have 10% more peak load capability as the bonus power for users. Featuring only 200 µA of leakage current at 264VAC, they can be equipped into non-patient contact medical equipment and still comply with Class B per EMI regulations. Standard functions include short circuit, overload, and over voltage protections and the no load power consumption for single output models is as low as 0.75W that can be used in powering electronic equipments required the green mode. Besides, since the height is only 29mm , the RPS/D/T -60 series are suitable for 1U installations or other height-constraint applications. General medical usage that requires low leakage current, general electronic application, and low profile IT equipment are all suitable for applying this miniature product series.

 

 

May 2006

Distribution of Power Supplies to the United States Mexico.

 

Norgay Enterprises expands distribution of Power Supplies to include customers in the United States and Mexico. Norgay is recognized throughout the power conversion, power condition and power supply industry as a technology leader and supplier of world class AC to DC power supplies and DC to DC converters.

 

"Our commitment is to continue to provide the absolute best price, delivery and customer service in the industry."

Bill Rajantie

President

Norgay Enterprises Ltd.

 

 

May 2006

KBT Communications appoints Norgay Enterprises as franchised stocking distributor.

KBT Communications (Kenbotong Communications Ltd.) and KBT USA with manufacturing facilities in Foshan China is one of the largest ISO9001:2000 certified antenna manufacturers in Asia.

For a complete listing of KBT Communications antenna products available from Norgay Enterprises call our North America Toll Free Number 800-280-2839 or search for Antennas in our products listing at www.norgay.com

 

 

April 2006

Norgay Enterprises Distributes SB Electronics.

SB Electronics designs and manufactures the most reliable film capacitor products available. SBE has designed unique technologies in pulse design and continue to introduce new products to the power, automotive e-drive, medical and energy efficient lighting industries.

 

Contact Norgay Enterprises for pricing and availability on all SB Electronics film capacitor products at 800-280-2839.


 

February 2006

Norgay Enterprises signs distribution agreement with Tamura Corporation.

Tamura Corporation is one of the largest manufacturers of magnetic components and power supplies in the world. Tamura has state of the art manufacturing facilities in Asia and Europe to support leading edge technologies for future high demand applications. Tamura products include Power Transformers, Telecom Transformers, Ethernet Transformers and Connector Modules, Current Sensors, Adapters and Power Supplies.

For more information contact: 800-280-2839
 

 

January 2006

More information
 

How many watts can you imagine to squeeze from a 5” * 3” * 1U dimension? 80W, 120W, or 150W? MEAN WELL launches the new “PPS-200 series” – 200W open frame type switching power supply with power factor correction (PFC) function that achieves the 200W milestone in this most popular dimension for PCB power supply. Thanks to the advanced technology of soft switching and synchronous rectification, all models of PPS-200 possess high efficiency characteristic that improved up to 6% compared to traditional topologies, and hence it can supply 150W by merely free air convection and 200W by forced air. With 9.78W/ in 3 of high power density, PPS-200 series is a compact 90~260V switcher that is ideal for 1U (1.75-inch) installations. The suitable application areas are general electronic application, factory automation, telecommunications, networking, test & measurement that have space constraint.
 

For pricing and availability click here.

 

December 2005

Norgay Enterprises Distributes JQL Electronics.

 

Norgay signs exclusive agreement to distribute the JQL line of microwave ferrite isolators/circulators, directional couplers, power divider/combiners and ceramic filters. JQL specializes in large scale manufacturing of rf/microwave components for the telecom and wireless industry. Norgay will provide sales, design and technical assistance and maintain inventory of JQL products for customers in Canada.

 

For more information contact: 1-800-280-2839

 

December 2005

Mag Layers USA appoints Norgay Enterprises as exclusive manufacturer’s representative in Canada. Mag Layers designs, develops and manufactures Low Temperature Cofired Ceramics (LTCC) multilayered components for the rf and microwave industry. Products include Low Pass Filters, Chip Antennas, Baluns, Diplexers, Antenna Switch Modules and Multilayer Chip Beads.

 

For more information contact Norgay at 1-800-280-2839 or www.maglayersusa.com
 

October 2005

Norgay Enterprises establishes sales and distribution agreement with Citel Inc. Citel manufactures a complete line of surge protectors for AC power, Telephone, data and RF coaxial lines. Citel surge protectors have been specially designed to provide an effective solution to Broadband Wireless, Telecom, Automation Control Instrumentation and security market industries. Citel has manufacturing facilities in France, Holland and China. Norgay will maintain inventory and provide technical and product information for customers in Canada.

For more information contact 800-280-2839

 

September 2005

Linx Technologies Incorporated appoints Norgay Enterprises as franchised distributor for Canada. Linx Technologies specializes in the design and manufacture of low cost wireless modules and semiconductors for the RF wireless industry.

For more information contact Norgay at 800-280-2839 or www.linxtechnologies.com

 

June 2005

Norgay Enterprises is a stocking distributor for Penny and Giles motorized faders and audio controls. Penny And Giles faders has a world wide reputation synonymous with quality and precision. From its pioneering development and innovative use of conductive plastics technology the company has built an industry wide name for design excellence, technical performance and reliability.

Click here for more information


 

Cosel introduces a line of EMI power line filters for conducted emissions. For more information click here

 

For pricing and availability contact: 800-280-2839

 

January 2005

Mean Well USA appoints Norgay Enterprises as Canadian distributor. A designer and manufacturer of AC to DC power supplies and DC to DC converters, Mean Well has manufacturing facilities in Taiwan and Mainland China. Norgay will stock and maintain inventory of Mean Well products for customers in Canada.

Contact Norgay Toll Free 800-280-2839 or for pricing and delivery information on all MeanWell products.

Norgay introduces the 2005 product line card listing new products for power and wireless applications. To receive your copy of the 2005 line card contact Norgay at 1-800-280-2839 or send us your mailing address and contact information by .

AOS Thermal Compounds appoints Norgay Enterprises as its exclusive manufacturers representative for Canada. AOS manufactures a wide selection of thermal interface materials for the electronics industry. For more information contact Norgay toll free at 800-280-2839 or www.aosco.com

 

October 2004

F.W. Bell introduces the 5100 series Gauss/Tesla meters.

For more information download the data sheet PDF

For pricing and availability call 1-800-280-2839

 

September 2004

Norgay represents Tecom Industries.

Tecom Industries designs and manufactures custom antenna systems for the commercial wireless and defense industries. Products include Omni Direction, Directional, Commercial/ GPS and SATCOM. www.tecom-ind.com

 

“Tecom Industries is an excellent addition to our existing product offering and will prove to be an exceptionally synergistic fit with products such as Times Microwave and Radio Waves Inc.”

Bill Rajantie

President

Norgay Enterprises